YUKEN HYDRAULIC POWER UNITS

Yuken Standard Hydraulic Power Units

These Yuken hydraulic power units are designed from the ground up with energy saving in mind. These inverter-driven systems offer energy savings of up to 40% over what is used by traditional hydraulic systems. Outfitted with variable displacement pumps, these power units and Yuken Energy-Saving Controllers control rotational frequency using an inverter, eliminating the energy losses normally associated with induction motors. Load pressure is detected by a pressure sensor and the motor rotation is controlled at the proper level to hold pressure. Low noise is a natural benefit of energy-efficient hydraulics.

Yuken Standard Hydraulic Power Units

Hydraulic power units equipped with variable displacement pumps feature greater energy-saving than those with fixed displacement pumps. Yuken’s energy-saving hydraulic units and controllers utilize rotational frequency control with an inverter. This innovative configuration solves the problem of efficiency losses suffered by induction motors operating at light loads and ensures significant energy savings

Features Yuken Hydraulic Power Units

● Extremely easy operation and maintenance Adjustment and maintenance works are very easy as basically the conventional power unit is used.

● Significant reduction of power consumption With rotational frequency control, more than 40% of power consumption at pressure holding is possible compared to conventional hydraulic units. ● Low Noise Especially the noise level at the full-cutoff is reduced.

● Discharge volume can be set to a certain volume at 50/60 Hz. Regardless the power supply frequency, the rotation speed at the maximum discharge volume can be set by the inverter within the range from 1500 to 1800 r/min.

● Continuous operation is possible even at breakdown of the pressure sensor or the inverter. Operation at a certain rotation speed is possible even without receiving a signal from the pressure sensor due to breaking of wire or malfunction of the pressure sensor. Incase of malfunction of the inverter itself

1. Yuken YM-e Pack

Energy-saving hydraulic power unit equipped with variable displacement vane pump.

Model Series:

  • E–YM8–A–2–*–30
  • E–YM8–B–2–*–30
  • E–YM16–A–2–*–30
  • E–YM16–A–2–*–30

2. Yuken YA-e Pack

Energy-saving hydraulic power unit outfitted with AR series or A series variable displacement piston pumps.

Model Series:

  • E–YA10–B–6–*–41
  • E–YA10–C–6–*–41
  • E–YA10–C–10–*–41
  • E–YA16–B–6–*–41
  • E–YA16–B–10–*–41
  • E–YA16–C–6–*–41
  • E–YA16–C–10–*–41
  • E–YA22–B–6–*–41
  • E–YA22–B–10–*–41
  • E–YA22–C–10–*–41
  • E–YA37–B–10–3.7–41
  • E–YA37–B–16–*–41

3. Yuken YF Pack - Space-saving Hydraulic Power Units

Integrated units with electric motor, piston pump, and reservoir offer a compact cubic design with no oil leakage (pipeless), low noise, and energy savings. The low temperature operation reduces thermal radiation and heat distortion.

Model Series:

  • YF10–B–1–0.75–H–**–20*
  • YF10–B–1–1.5–H–**–20*
  • YF10–C–1–1.5–H–**–20*
  • YF16–B–1–1.5–H–**–20*
  • YF16–B–1–2.2–H–**–20*
  • YF16–B–2U–2.2–H–**–20*
  • YF16–B–2S–2.2–H–**–20*
  • YF16–C–1–1.5–H–**–20*
  • YF16–C–1–2.2–H–**–20*
  • YF16–C–2U–2.2–H–**–20*
  • YF16–C–2S–2.2–H–**–20*

4. Yuken YP Pack - Low Noise Compact Hydraulic Power Unit

These small hydraulic power units are designed with upright PAL pumps and a reduced reservoir size with drain cooler. Low noise and vibration. Cool operation is achieved by the drain cooler and radiator fins, minimizing heat distortion.

Model Series:

  • YP10–B–1–0.75–22
  • YP10–*–1–1.5–22
  • YP16–*–1–1.5–22
  • YP16–*–1–2.2–22
  • YP16–*–2–2.2–22
  • YP22–*–2–2.2–22
  • YP22–*–3–3.7–22
  • YP37–*–3–3.7–22
  • YP37–*–3–5.5–22

5. Yuken AC Servo Motor Driven Hydraulic Pump Control System - Intelligent Hydraulic Servo Drive Pack

This digitally-controlled, software driven system combines the piston pump, hydraulic control circuit, and reservoir with an AC servo motor in one convenient package and can control the servo motor revolution speed as well as discharge and pressure. When combined with a hydraulic cylinder (sensor-equipped) and a separate controller, this unit can be configured to control position, speed and pressure. It is low-noise, energy-efficient and compact.

Model Series:

  • YSD1–*–09
  • YSD1–*–13
  • YSD2–*–18
  • YSD2–*–29
  • YSD2–*–44
  • YSD3–*–55
  • YSD3–*–75

Yuken Y series Hydraulic Power Unit Part Numbers

  • YA10-B-4-0.75-41
  • YA16-B-10-2.2-41
  • YA16-B-6-2.2-42
  • YA16-C-10-5.5-41
  • YA16-C-10-7.5-41
  • YA16-C-10-7.5-43-OP
  • YA16-C-6-3.7-41
  • YA16-C10-7.5-43-OP-01M2T3VMg
  • YA22-C-10-7.5-10
  • YF10-B-1-1.5-20
  • YF10-B-1-1.5-H-M-20
  • YF10-C-1-1.5-H-11-505-20
  • YF10-C-1-1.5-H-11-LT-20
  • YF16-B-1-1.5-20
  • YF16-B-1-1.5-H-MLT-20950
  • YF16-B-1-2.2-H-13-20
  • YF16-C-1-2.2-V-12-LP-20
  • YF16-C-2S-2.2-H-12-20950
  • YF16-C-2S-2.2-H-ML-20953
  • YF16-H-2U-2.2-H-13-20953
  • YF16-H-2U-2.2-H-20953
  • YM16-B-2.2-2-30
  • YM8-B-2-1.5-30
  • YP10-B-1-0.75-22
  • YP16-B-1-1.5-22
  • YP16-B-2-2.2-22
  • YP16-C-1-2.2-22
  • YP16-C-2-2.2-22
  • YP22-B-2-2.2-22
  • YP22-C-3-3.7-22